Skip to main content
VoD-Mini Use

The steps involved for using the VoD-Mini

Written by Stefan
Updated over a week ago

Press and hold the ON/OFF button for several seconds to turn unit on. The unit will illuminate BLUE then flash BLUE for a few seconds, then it will illuminate solid RED, this means it is on, but no cable is connected.

Once you connect cable the RED LED will flash quickly.

When the unit recognises cable it will arm itself in around 2 minutes, then it will flash RED slowly. Note that you require at least a 2 meter instantaneous reduction of cable to trigger the unit.

When the unit triggers it will illuminate BLUE for the duration of it saving data, around a minute. Then switch itself off.

Did this answer your question?